油漆都是3類危險品，UN1263 或者是UN1139 .易燃液體.

Paint is class 3 dangerous goods, un1263 or un1139. Flammable liquid.

然后落實好這個油漆的成分配比，海關申報也要提供的，這樣我們才能歸類油漆的海關編碼，因?yàn)椴皇撬杏推嵝枰獋浒傅摹?

32081000 溶于非水介質的聚酯油漆及清漆等（以聚酯為基本成分的（包括瓷漆及大漆））
32082010.10 溶于非水介質的光導纖維用涂料（以丙烯酸酯類化合物為主要成分）
32082010.90 其他聚丙烯酸油漆、清漆等（溶于非水介質的以丙烯酸聚合物為基本成分，包括瓷漆及大漆）
32082020 溶于非水介質的聚乙烯油漆及清漆（以乙烯聚合物為基本成分（包括瓷漆及大漆））
32089010.10 溶于非水介質的光導纖維用涂料（以聚胺酯類化合物為主要成分）
32089010.90 其他聚胺酯油漆清漆等（溶于非水介質以聚胺酯類化合物為基本成分，含瓷漆大漆）
32089090 溶于非水介質其他油漆、清漆溶液（包括以聚合物為基本成分的漆，本章注釋四所述溶液）
32091000 溶于水介質的聚丙烯酸油漆及清漆（以聚丙烯酸或聚乙烯為基本成分的（包括瓷漆及大漆））
32099000 溶于水介質其他聚合物油漆及清漆（以合成聚合物或化學改性天然聚合物為基本成分的）

Then we should make sure the composition ratio of the paint, which should be provided by the customs declaration, so that we can classify the paint's customs code, because not all paints need to be recorded.
32081000 polyester paint and varnish soluble in non-aqueous medium (polyester based (including enamel and lacquer))
32082010.10 coating for optical fiber soluble in non-aqueous medium (mainly composed of acrylate compounds)
32082010.90 other polyacrylic acid paints, varnishes, etc. (soluble in non-aqueous media with acrylic polymer as the basic component, including enamel and lacquer)
32082020 polyethylene paints and varnishes in non-aqueous media (based on ethylene polymer (including enamel and lacquer))
32089010.10 coating for optical fiber in non-aqueous medium (with polyamine ester as main component)
32089010.90 other polyurethane paints and varnishes, etc. (soluble in non-aqueous media with polyurethane compounds as the basic component, including enamel paint)
32089090 solution for other paints and varnishes in non-aqueous media (including those based on polymers, as described in note 4 of this chapter)
32091000 water-soluble polyacrylic paint and varnish (based on polyacrylic acid or polyethylene (including enamel and lacquer))
32099000 other polymer paints and varnishes (based on synthetic polymer or chemically modified natural polymer)

備案流程如下：

The filing process is as follows:

• 申請材料

  （一）《進口涂料備案申請表》；
  （二）進口涂料生產商對其產品中有害物質含量符合中華人民共和國國家技術規范要求的聲明；
  

  （三）關于進口涂料產品的基本組成成份、品牌、型號、產地、外觀、標簽及標記、分裝廠商和地點、分裝產品標簽等有關材料（以中文文本為準）。

• Application materials
  (1) application form for filing of imported coatings;
  (2) the declaration of the imported coating manufacturer that the content of harmful substances in its products conforms to the requirements of the national technical specifications of the people's Republic of China;
  (3) the basic composition, brand, model, place of origin, appearance, label and mark of imported paint products, sub packaging manufacturer and place, sub packaging product label and other relevant materials (subject to the Chinese version).

• 辦理流程

  （一）備案申請人在涂料進口至少兩個月前向備案機構申請備案；
  （二）備案機構收到備案申請后，應在5個工作日內審查備案申請人資格、備案申請表和所附資料，并發出《進口涂料備案申請受理情況通知書》；
  （三）專項檢測實驗室應當在接到樣品15個工作日內，完成對樣品的專項檢測及進口涂料專項檢測報告；
  

  （四）備案機構收到專項檢測報告后，應在3個工作日內，根據相關規定、標準對專項檢測結果進行判定，判定合格的，出具《進口涂料備案書》；結果判定不合格的，出具《進口涂料備案情況通知書》。

• Processing flow
  (1) the filing applicant shall apply to the filing institution for filing at least two months before the import of coatings;
  (2) after receiving the filing application, the filing institution shall, within 5 working days, examine the qualification of the filing applicant, the filing application form and the attached materials, and issue the notice of acceptance of the filing application for imported coatings;
  (3) the special testing laboratory shall, within 15 working days after receiving the samples, complete the special testing report on the samples and the special testing report on the imported coatings;
  (4) after receiving the special test report, the filing institution shall, within 3 working days, determine the special test results according to the relevant regulations and standards, and issue the imported coating Filing Certificate if the results are qualified; if the results are unqualified, issue the imported coating filing notice.
  

• 辦理形式 ：窗口辦理

• Handling form: window handling

• 辦理地點 ：各直屬海關業務現場（鏈接至各直屬海關網站）

• Place of handling: business site of each direct customs (link to the website of each direct customs)

• 法定辦結時限 備案機構收到備案申請后，應在5個工作日內審查備案申請人資格、備案申請表和所附資料，并發出《進口涂料備案申請受理情況通知書》；專項檢測實驗室應當在接到樣品15個工作日內，完成對樣品的專項檢測及進口涂料專項檢測報告；備案機構收到專項檢測報告后，應在3個工作日內，根據相關規定、標準對專項檢測結果進行判定。

• Within 5 working days after receiving the filing application, the filing institution shall review the qualification of the filing applicant, the filing application form and the attached materials, and issue the notice of acceptance of the filing application of imported coatings; the special testing laboratory shall complete the special testing of samples and the special testing report of imported coatings within 15 working days after receiving the samples; the filing institution shall receive After the special test report, the special test results shall be determined according to relevant regulations and standards within 3 working days.

• 承諾辦結時限 備案機構收到備案申請后，應在5個工作日內審查備案申請人資格、備案申請表和所附資料，并發出《進口涂料備案申請受理情況通知書》；專項檢測實驗室應當在接到樣品15個工作日內，完成對樣品的專項檢測及進口涂料專項檢測報告；備案機構收到專項檢測報告后，應在3個工作日內，根據相關規定、標準對專項檢測結果進行判定。

• After receiving the filing application, the filing institution shall review the qualification of the filing applicant, the filing application form and the attached information within 5 working days, and issue the notice of acceptance of the filing application of imported coatings; the special testing laboratory shall complete the special testing of samples and the special testing report of imported coatings within 15 working days after receiving the samples; the filing institution shall receive After the special test report, the special test results shall be determined according to relevant regulations and standards within 3 working days.

• 結果名稱 ：進口涂料備案書

• Result Name: imported coating record
  

海關鏈接地址；

http://online.customs.gov.cn/static/pages/treeGuide.html

Customs link address;

http://online.customs.gov.cn/static/pages/treeGuide.html

成分信息是很重要的，它不僅涉及到進口需要不需要備案，進口需要不需要3C的問題。有些成分占比大了還需要兩用物項進口證的
目前對于涉及危險品的涂料需要加貼危險品中文標簽，包裝需要符合危險品包裝要求。

Ingredient information is very important, it not only involves the import need not to record, import need not to 3C. Some of the ingredients account for a large proportion, and the import license for dual-use items is required.
At present, the Chinese label of dangerous goods should be pasted for the coating involving dangerous goods, and the packaging should meet the requirements of dangerous goods packaging.

進口危險品油漆涂料中文標簽基本信息：

1.品名

2.成分

3.GHS標識

4.危險聲明

5.預防措施

6.事故響應

7.安全儲存

8.廢棄處理

9.制造商

10.供應商

11.應急咨詢電話

Basic information of Chinese label of imported dangerous goods paint and coating:
1. name
2. components
3.GHS logo
4. Hazard statement
5. Preventive measures
6. Accident response
7. Safe storage
8. Waste treatment
9. manufacturers
10. suppliers
11. Emergency consultation telephone